Mergers and Aquisitions

An acquisition,(the ‘target’) by another. Consolidation is when two companies combine together to form a new company altogether. An acquisition may be private or public, depending on whether the acquiree or merging company is or isn’t listed in public markets. An acquisition may be friendly or hostile. Whether a purchase is perceived as a friendly or hostile depends on how it is communicated to and received by the target company’s board of directors, employees and shareholders. It is quite normal though for M&A deal communications to take place in a so called ‘confidentiality bubble’ whereby information flows are restricted due to confidentiality agreements (Harwood, 2005). In the case of a friendly transaction, the companies cooperate in negotiations; in the case of a hostile deal, the takeover target is unwilling to be bought or the target’s board has no prior knowledge of the offer. Hostile acquisitions can, and often do, turn friendly at the end, as the acquiror secures the endorsement of the transaction from the board of the acquiree company. This usually requires an improvement in the terms of the offer. Acquisition usually refers to a purchase of a smaller firm by a larger one. Sometimes, however, a smaller firm will acquire management control of a larger or longer established company and keep its name for the combined entity. This is known as a reverse takeover. Another type of acquisition is reverse merger, a deal that enables a private company to get publicly listed in a short time period. A reverse merger occurs when a private company that has strong prospects and is eager to raise financing buys a publicly listed shell company, usually one with no business and limited assets. Achieving acquisition success has proven to be very difficult, while various studies have shown that 50% of acquisitions were unsuccessful.The acquisition process is very complex, with many dimensions influencing its outcome.There is also a variety of structures used in securing control over the assets of a company, which have different tax and regulatory implications:

Acquisition

• The buyer buys the shares, and therefore control, of the target company being purchased. Ownership control of the company in turn conveys effective control over the assets of the company, but since the company is acquired intact as a going concern, this form of transaction carries with it all of the liabilities accrued by that business over its past and all of the risks that company faces in its commercial environment.
• The buyer buys the assets of the target company. The cash the target receives from the sell-off is paid back to its shareholders by dividend or through liquidation. This type of transaction leaves the target company as an empty shell, if the buyer buys out the entire assets. A buyer often structures the transaction as an asset purchase to “cherry-pick” the assets that it wants and leave out the assets and liabilities that it does not. This can be particularly important where foreseeable liabilities may include future, unquantified damage awards such as those that could arise from litigation over defective products, employee benefits or terminations, or environmental damage. A disadvantage of this structure is the tax that many jurisdictions, particularly outside the United States, impose on transfers of the individual assets, whereas stock transactions can frequently be structured as like-kind exchanges or other arrangements that are tax-free or tax-neutral, both to the buyer and to the seller’s shareholders.

The terms “demerger”, “spin-off” and “spin-out” are sometimes used to indicate a situation where one company splits into two, generating a second company separately listed on a stock exchange.

Distinction between mergers and acquisitions

Although often used synonymously, the terms merger and acquisition mean slightly different things.When one company takes over another and clearly establishes itself as the new owner, the purchase is called an acquisition. From a legal point of view, the target company ceases to exist, the buyer “swallows” the business and the buyer’s stock continues to be traded.

In the pure sense of the term, a merger happens when two firms agree to go forward as a single new company rather than remain separately owned and operated. This kind of action is more precisely referred to as a “merger of equals”. The firms are often of about the same size. Both companies’ stocks are surrendered and new company stock is issued in its place. For example, in the 1999 merger of Glaxo Wellcome and SmithKline Beecham, both firms ceased to exist when they merged, and a new company, GlaxoSmithKline, was created.

In practice, however, actual mergers of equals don’t happen very often. Usually, one company will buy another and, as part of the deal’s terms, simply allow the acquired firm to proclaim that the action is a merger of equals, even if it is technically an acquisition. Being bought out often carries negative connotations, therefore, by describing the deal euphemistically as a merger, deal makers and top managers try to make the takeover more palatable. An example of this would be the takeover of Chrysler by Daimler-Benz in 1999 which was widely referred to as a merger at the time.

A purchase deal will also be called a merger when both CEOs agree that joining together is in the best interest of both of their companies. But when the deal is unfriendly (that is, when the target company does not want to be purchased) it is always regarded as an acquisition.

Business valuation

The five most common ways to valuate a business are

• asset valuation,
• historical earnings valuation,
• future maintainable earnings valuation,
• relative valuation (comparable company & comparable transactions),
• discounted cash flow (DCF) valuation

Professionals who valuate businesses generally do not use just one of these methods but a combination of some of them, as well as possibly others that are not mentioned above, in order to obtain a more accurate value. The information in the balance sheet or income statement is obtained by one of three accounting measures: a Notice to Reader, a Review Engagement or anAudit.

Accurate business valuation is one of the most important aspects of M&A as valuations like these will have a major impact on the price that a business will be sold for. Most often this information is expressed in a Letter of Opinion of Value (LOV) when the business is being valuated for interest’s sake. There are other, more detailed ways of expressing the value of a business. While these reports generally get more detailed and expensive as the size of a company increases, this is not always the case as there are many complicated industries which require more attention to detail, regardless of size.

Financing M&A

Mergers are generally differentiated from acquisitions partly by the way in which they are financed and partly by the relative size of the companies. Various methods of financing an M&A deal exist:

Cash

Payment by cash. Such transactions are usually termed acquisitions rather than mergers because the shareholders of the target company are removed from the picture and the target comes under the (indirect) control of the bidder’s shareholders.

Stock

Payment in the acquiring company’s stock, issued to the shareholders of the acquired company at a given ratio proportional to the valuation of the latter.

Motives behind M&A

The dominant rationale used to explain M&A activity is that acquiring firms seek improved financial performance. The following motives are considered to improve financial performance:

• Economy of scale: This refers to the fact that the combined company can often reduce its fixed costs by removing duplicate departments or operations, lowering the costs of the company relative to the same revenue stream, thus increasing profit margins.
• Economy of scope: This refers to the efficiencies primarily associated with demand-side changes, such as increasing or decreasing the scope of marketing and distribution, of different types of products.
• Increased revenue or market share: This assumes that the buyer will be absorbing a major competitor and thus increase its market power (by capturing increased market share) to set prices.
• Cross-selling: For example, a bank buying a stock broker could then sell its banking products to the stock broker’s customers, while the broker can sign up the bank’s customers for brokerage accounts. Or, a manufacturer can acquire and sell complementary products.
• Synergy: For example, managerial economies such as the increased opportunity of managerial specialization. Another example are purchasing economies due to increased order size and associated bulk-buying discounts.
• Taxation: A profitable company can buy a loss maker to use the target’s loss as their advantage by reducing their tax liability. In the United States and many other countries, rules are in place to limit the ability of profitable companies to “shop” for loss making companies, limiting the tax motive of an acquiring company. Tax minimization strategies include purchasing assets of a non-performing company and reducing current tax liability under the Tanner-White PLLC Troubled Asset Recovery Plan.
• Geographical or other diversification: This is designed to smooth the earnings results of a company, which over the long term smoothens the stock price of a company, giving conservative investors more confidence in investing in the company. However, this does not always deliver value to shareholders (see below).
• Resource transfer: resources are unevenly distributed across firms (Barney, 1991) and the interaction of target and acquiring firm resources can create value through either overcominginformation asymmetry or by combining scarce resources.
• Vertical integration: Vertical integration occurs when an upstream and downstream firm merge (or one acquires the other). There are several reasons for this to occur. One reason is to internalise an externality problem. A common example is of such an externality is double marginalization. Double marginalization occurs when both the upstream and downstream firms have monopoly power, each firm reduces output from the competitive level to the monopoly level, creating two deadweight losses. By merging the vertically integrated firm can collect one deadweight loss by setting the downstream firm’s output to the competitive level. This increases profits and consumer surplus. A merger that creates a vertically integrated firm can be profitable.
• Absorption of similar businesses under single management: similar portfolio invested by two different mutual funds (Ahsan Raza Khan, 2009) namely united money market fund and united growth and income fund, caused the management to absorb united money market fund into united growth and income fund.

However, on average and across the most commonly studied variables, acquiring firms’ financial performance does not positively change as a function of their acquisition activity.Therefore, additional motives for merger and acquisition that may not add shareholder value include:

• Diversification: While this may hedge a company against a downturn in an individual industry it fails to deliver value, since it is possible for individual shareholders to achieve the same hedge by diversifying their portfolios at a much lower cost than those associated with a merger. (In his book One Up on Wall Street, Peter Lynch memorably termed this “diworseification”.)
• Manager’s hubris: manager’s overconfidence about expected synergies from M&A which results in overpayment for the target company.
• Empire-building: Managers have larger companies to manage and hence more power.
• Manager’s compensation: In the past, certain executive management teams had their payout based on the total amount of profit of the company, instead of the profit per share, which would give the team a perverse incentive to buy companies to increase the total profit while decreasing the profit per share (which hurts the owners of the company, the shareholders); although some empirical studies show that compensation is linked to profitability rather than mere profits of the company.